Please refer to this link before beginning any Direct View LED Display installs. Solution Step 1: Install the Wall-mount brackets Step 2: Install the Cabinets onto the Floor Stand, connect the System Control Box to the Cabinets Step 3: Install the System Control Box onto the Floor Stand Step 4: Install the LED Modules onto t...
Solution Step 1: Please contact customer service staff to obtain the mandatory firmware update file(s) Step 2: Copy the files to the outermost directory of the USB Step 3: Turn off the power of the LED display and plug in the USB Step 4: Press the power button to turn on the display, and immediately press the Menu butto...
Answer: If the LED display does not work, but the power supply and other equipment checks are working, it may be caused by a firmware conflict. Please perform mandatory firmware update under this circumstance.
The Direct View LED Display can be operated by either: 1) the Remote, 2) the Keyboard, 3) or RS232 For further details, please refer to this link and select the appropriate model to view the respective User Guide.
Answer: Blank can quickly switch between a black screen and the input screen. This feature simply displays a blank screen and does not turn off the system controls. Similarly, "Hibernate" Standby mode powers off the screen only but still has minor power utilization for temporary memory purposes. In complete contrast, "Sleep" Standby mode po...
Solution Please refer to the following diagram below. This information can also be found in each Direct View LED Display's respective User Guide. Recommended Links "Why is the DVLED Display remote control having trouble with sensitivity or not working?" "How do I lock the remote control for my DVLED Display?"
When you find that the edge brightness of the LED module is different from that of the adjacent modules, the following procedure below can be followed in order to resolve the problem. Solution Step 1: Use the USB B-to-A cable and HDMI cable to connect the monitor to the computer, and switch the monitor's input source to HDMI. Step...
Solution Step 1: Select the Settings from the Main Menu Step 2: Select "Upgrade" Step 3: Select "OTA Cloud Server" Step 4: Switch "Auto Updates" to on After turning on the automatic update setting, when the LED display is turning off, the automatic detection of firmware updates will occur. If the latest firm...
After replacement of a particular LED module, brightness may be slightly different than that of other modules. At this point, manual calibration is required. In order to troubleshoot this problem, the following procedure can be followed. Solution Step 1: Use the USB B-to-A cable and HDMI cable to connect the monitor to the computer, ...
Solution After replacing the LED module, you may find that the overall or edge brightness of the replaced module is different from other modules. Please adjust it according to the following debugging processes (click to view): Overall Brightness Edge Brightness