Why is there touch response randomly on my TD2220/TD2421 even nobody touches the screen?

These models are optical touch monitors which use two CMOS cameras (optical sensors) placed in the corners at the top of the screen as well as three reflectors (light strips). These cameras are used to look across the entire touch surface for touch events. When an object touches the screen, it blocks some of the light being received by the se...

How to set maximum resolution for my monitor?

Please refer to this FAQ section 1 and set to recommended display resolution.

How to change refresh rate in windows 10?

Please refer to the video on how to change: https://www.youtube.com/watch?v=sAkbjPiLNcE

What to do if there is flickering image with my monitor?

Check the monitor: Please do memory recall. Please refer to this FAQ Check device setting: Please check and set to recommended refresh rate.  You can refer to this video. https://www.youtube.com/watch?v=sAkbjPiLNcE   If possible, please connect monitor to another device with different input.   If above doesn’t help, please contact ViewSo...

What to do when a black border coming on the image?

If the image doesn’t fit the screen, please do the following:   1.Check the applied resolution to make sure that they match the settings recommended in the user guide.     To check the resolution in Windows:     (1)Settings > Display > Click on the display that user wants to change the setting         (2)Change the display resolution for ...

What to do when no video by using HDMI port?

If you are experiencing problems using HDMI input, suggest do the followings:   Please check below on monitor:   Make sure the correct HDMI input is selected in OSD. Turn on the monitor first then PC.   Please check below on PC:    Test the monitor on a different computer with a HDMI port. Replace another HDMI cable. If...

How to do color calibration with my monitor?

Please refer to this FAQ, find "Calibrate your display" section and follow the instruction.

How to solve the problem with my monitor as it turns off automatically?

If the monitor turns on briefly, then turns off, check the following: Make sure the power cable is securely connected. Turn off the monitor, unplug the power cable for 15 seconds and plug the power cable back then turn on. Check the video cable and make sure it is connected on both ends securely.           Reset the factory default ...

What to do when image is pixelated?

Set the resolution higher. Test the monitor on a different computer to isolate the problem.  Please follow the instructions below on how to change the resolution on a computer running Windows 10.   To change the resolution in Windows, do the following:  Right-click on an empty area of the Windows® desktop.  From the pop-up menu, select Di...

Is there Linux drivers for my monitor?

No, as Linux system should automatically identify and recognize the monitor.