Why isn't there any response while trying to connect IFP5550/IFP6550/IFP7550/IFP8650 by RS232?

1. A RS232 crossover cable and a RS232 adapter are included in the package of IFPxx50 series. Make sure to install both RS232 cable and adapter.

2. Make sure to set the communication settings below correctly

    - Baud Rate Select: 9600bps (fixed)
    - Data bits: 8 bits (fixed)
    - Parity: None (fixed)
    - Stop Bits: 1(fixed)


 
3.If you connect from PC, please make sure the com port is correctly chosen.

 

   

 

4. It's recommended to vController to control the Viewboard by RS232.

    Please refer to tutorial and UG.

    

Ultima modificare: mai 2021

Contactează-ne

Contactează-ne direct dacă nu poți obține răspunsurile și soluțiile pentru produsele tale ViewSonic.