Please open the OSD menu and navigate into “Input Select”. Then, select Auto-Detect and make sure it is set to ON.
The input source auto detect function is only supported by specific model of monitors. Please refer to the user guide to confirm this feature. If your monitor supports this feature, it will be disabled by default. Please make sure to enable it within the OSD menu.
The Auto-Pivot function uses DDC/CI to communicate with the monitor. Please make sure not to turn off the monitor’s DDC/CI option in the OSD menu when you are using the Auto Pivot function.
For optimal performance, please make sure your monitor is fully up to date. If your VP2468 monitor’s firmware version is M001 or M002, please make sure your OSD Pivot and Auto-Pivot functions are, both, set to Auto.
Since OSD pivot function in the OSD menu only affects the OSD menu itself. Please also install vDisplay Manager in your operating system so that your operating system screen can automatically rotate with the monitor’s orientation.
As of Dec. 8 2020, below VP models support Auto Pivot function. VP2458, VP2468, VP2468a, VP2768, VP2768a, VP2785-4K VP2768-4K, VP2785-2K, VP2771, VP2775, VP3268-4K. Please refer to below steps to enable the function. 1.Download and install vDisplay Manager. 2.Follow UG for connection and setting. 3.Enable DDC/CI in monitor OSD to...
Auto Pivot has been already integrated into the vDisplay Manager software. Both the Windows and Mac version of vDisplay Manager support this feature. vDisplay Manager can be downloaded at: http://color.viewsonic.com/ or by clicking here.
To make auto pivot work, the communication between OS and monitor is necessary. In Mac OS X or prior version, such communication is done by HDMI signal. However, in Mac OS Sierra and later, Apple changed the behavior in which this is no longer communicated with HDMI signal. Thus, it's necessary to connect both VP2468/VP2768 and iMac by a ...
The monitor’s OSD pivot function is only effective for the OSD window itself. Additionally, the vDisplay Manager software will be required for the operating system to automatically adjust the monitor’s orientation.
To enable 4K at 60Hz over USB, go into the OSD Setup Menu -> Select ‘"SB 3.1" -> Select "Turn Off". * Using USB Type-C to display 4K resolution at a refresh rate of 60Hz requires you to turn off USB 3.1. ** Current only the following VP monitors support 4K at 60Hz via USB Type-C: - VP2785-4K - VP3881