ViewSonic e-Posters do not support Power Point presentations natively. There are 3 ways to achieve this purpose. 1.Use vSignage: Models like EP4320/EP5520/EP5520T/EP5540/EP5540T have built in the vSignage. You are able to use the power point widget to publish your power point file from the computer to the e-Posters. 2. Connect a...
1. Overview The "Android Boot Animation" is a script used to load PNG files when the device boots. It is contained within an uncompressed zip file called bootanimation.zip. 2. Inside the bootanimation.zip file The bootanimation.zip file contains: The image folder(s) (containing PNG images named by incremental numbers) The desc...
Requirements: - USB Flash Drive (FAT32 Formatted): How to format USB flash drive to FAT32 - vSignage license file, available on the Download section of the product's page* 1. Copy the license file (license-production_VSI.PKG) to the root directory of the USB flash drive. 2. Insert the USB flash drive into USB port of the display....
1. Download the attached license file. 2. Select the correct Time Zone. 3. Please follow the below procedures to install the Signage Manager license: license URL:https://support.viewsonic.com/helpdesk/attachments/33040907670
Please refer the attachment. Attachment URL:https://support.viewsonic.com/helpdesk/attachments/33010268005
ViewSonic CDE30 Series power save modes: Which mode should i use? There are four Power Save modes to choose from and knowing which one to use depends on the application. For this scenario we will cover digital signage, information and monitoring systems and meeting rooms where always-on, wake up on active signal and fast boot time is a must...
Model Name CDM series CDE10 series CDE20 series EP5540/T EP5542/T Supported WiFi Dongle Built-in WiFi module LB-WiFi-001 LB-WiFi-001 TL-WN725N TL-WN725N TL-WN725N TL-WN725N VSB050 VSB050 VB-WIFI-001 Note: 1. WPA stands for Wi-Fi Protected Access. 2. All WiFi modules and dongles only support W...
1. On the Remote Control press INPUT 9 9 1 to enter factory mode. 2. Select Other Setting in the DEBUG MENU. 3. Select Boot Mode. 4. A dialog box will pop up. Select – Disable Embedded OS. 5. Press OK on the Remote Control and the system will reboot.
1. Format the USB disk as FAT32. 2. Unzip the “MstarUpgrade_848.zip” and then copy the .bin file to the USB disk (FAT32) in the root directory. 3. In Android mode, press the Source menu button, then press INPUT 9 9 1 to open the Service Menu. 4. Select "Firmware Update" and press OK. 5. Select "Upgrade Main" and press OK. ...
MAC address is available on a label outside the carton as below. If carton is not available, check it under Android system with details below. 1. Press HOME on RC and select Settings 2. Select Network 3. Select Ethernet 4. MAC address listed as below