Check the monitor: Please do memory recall. Please refer to this FAQ Check device setting: Please check and set to recommended refresh rate. You can refer to this video. https://www.youtube.com/watch?v=sAkbjPiLNcE If possible, please connect monitor to another device with different input. If above doesn’t help, please contact ViewSo...
Please refer to the video on how to change: https://www.youtube.com/watch?v=sAkbjPiLNcE
In normal operating conditions, there might be normal electric current sound came monitor which should not impact on your usage. If this did not occur in the past but appeared recently, please contact ViewSonic service center.
If the image doesn’t fit the screen, please do the following: 1.Check the applied resolution to make sure that they match the settings recommended in the user guide. To check the resolution in Windows: (1)Settings > Display > Click on the display that user wants to change the setting (2)Change the display resolution for ...
Please refer to this FAQ, find "Calibrate your display" section and follow the instruction.
If you're not able to install your monitor drivers with the driver pack "Standard Monitor Driver Signed Windows 10 x64 " downloaded from ViewSonic website, please follow below instruction to manually install Win10 x64 driver. 1. Download the attached ZIP file including monitor drivers to your PC and extract it. 2. Under "Control Panel",...
1.If the line location is not fixed, please check and adjust firstly by following below methods: (1) Check the video cables and/or another video input. Make sure the cable is securely connected and if possible, change the cable. (2) Use another power outlet. (3) Connect the monitor to another computer. 2. If the line location is...
Dual monitor setup is simple to configure on modern computers. Windows will automatically detect and configure the displays. Requirement: 1. Windows 7 or later. 2. A PC or laptop with at least 2 video out ports. 3. 2 monitors. After connected 2 monitors to 2 video out ports, Windows will automatically load the drivers and present a...
When using a monitor in the digital (HDMI, DisplayPort) connection, Auto Image Adjust and Manual Image Adjust settings may be disabled. This is normal as the monitor will adjust itself when in the digital mode.
Input lag means the time difference between when user controls PC and sees the response on monitor. There is a trade-off to picture/video performance. If no particular demand, it is suggested to set it to off.