How to solve the problem with my monitor as it turns off automatically?

If the monitor turns on briefly, then turns off, check the following: Make sure the power cable is securely connected. Turn off the monitor, unplug the power cable for 15 seconds and plug the power cable back then turn on. Check the video cable and make sure it is connected on both ends securely.           Reset the factory default ...

Why Auto Image Adjust function is gray out in monitor OSD?

When using a monitor in the digital (HDMI, DisplayPort) connection, Auto Image Adjust and Manual Image Adjust settings may be disabled. This is normal as the monitor will adjust itself when in the digital mode.

How to set power lock and menu lock?

On some monitors, there is a power button lock that locks the power and power button in the ON position.  There is also a menu lock feature which can lock and unlock the OSD (On-Screen Display) Menu.  Power Lock: To lock the Power Button press and hold both the [1] button and the down arrow button for 10 seconds.  OSD Lock: ...

What to do if there is shadow or double image on screen?

This can be caused by a long cable or docking stations.   Longer cables may be prone to ghosting, lines, double images, or poor focus.  The improper shielding of the cables can cause a shadowing or ghosting effect also.    We recommend to check the video cable and, if possible, use HDMI Premium certificate cable for long distance connectio...

What to do when there is no display from my monitor?

Please make sure the monitor’s power cable is properly seated in the port and that the monitor is powered on. By default LED indicator will light up when the monitor is powered on. If no LED indicator lights up, please try another power outlet first.   If above doesn’t help, please contact ViewSonic service center. 

Should I install Windows 10 drivers for my monitor?

ViewSonic plug and play monitors do not require a proprietary Windows 10 driver to be installed.   Instead, Windows 10 will automatically read the EDID information stored in the monitor and install Generic PNP Monitor drivers to enable its full resolution capabilities.   The only difference is you will see monitor model name in Device Manag...

What to do when image is pixelated?

Set the resolution higher. Test the monitor on a different computer to isolate the problem.  Please follow the instructions below on how to change the resolution on a computer running Windows 10.   To change the resolution in Windows, do the following:  Right-click on an empty area of the Windows® desktop.  From the pop-up menu, select Di...

How to solve the overscan problem with my monitor?

If the image does not fill the screen of the monitor or if it looks like the image is slightly too big for the monitor, try below suggestion.   1.Adjust setting on the PC/laptop:   (1)Set native resolution of monitor in your PC/laptop's Display settings.   (2)Change Scaling in Display settings.   Use the graphic card software to change ...

How to Enable 180Hz Refresh Rate on my ViewSonic monitor?

To enable 180Hz refresh rate on your monitor, you need to turn on Overclocking in the monitor's On-Screen Display (OSD) Menu. After turning on Overclocking, you then can set the refresh rate to 180 Hz under your computer's “Display” settings. For example, in Windows go to Settings > System > Display >  Advanced display to set the refr...

How to output video at 120Hz from PS5 or Xbox Series X/S to ViewSonic monitors?

The new gaming consoles from Sony and Microsoft support video ouput up to 120Hz. Please follow below instructions to enable 120Hz on your console. <PlayStation 5> 1. Open "Settings". 2. Select "Screen and Video". 3. Select "Enable 120 Hz Output" in "Video Output". 4. Select "Automatic" in the pop-up menu. ...