How to set maximum resolution for my monitor?

Please refer to this FAQ section 1 and set to recommended display resolution.

Why is there touch response randomly on my TD2220/TD2421 even nobody touches the screen?

These models are optical touch monitors which use two CMOS cameras (optical sensors) placed in the corners at the top of the screen as well as three reflectors (light strips). These cameras are used to look across the entire touch surface for touch events. When an object touches the screen, it blocks some of the light being received by the se...

What to do if there is flickering image with my monitor?

Check the monitor: Please do memory recall. Please refer to this FAQ Check device setting: Please check and set to recommended refresh rate.  You can refer to this video. https://www.youtube.com/watch?v=sAkbjPiLNcE   If possible, please connect monitor to another device with different input.   If above doesn’t help, please contact ViewSo...

How to change refresh rate in windows 10?

Please refer to the video on how to change: https://www.youtube.com/watch?v=sAkbjPiLNcE

What to do when a black border coming on the image?

If the image doesn’t fit the screen, please do the following:   1.Check the applied resolution to make sure that they match the settings recommended in the user guide.     To check the resolution in Windows:     (1)Settings > Display > Click on the display that user wants to change the setting         (2)Change the display resolution for ...

Why is there high pitched noise from my monitor?

In normal operating conditions, there might be normal electric current sound came monitor which should not impact on your usage.   If this did not occur in the past but appeared recently, please contact ViewSonic service center.

Is there Linux drivers for my monitor?

No, as Linux system should automatically identify and recognize the monitor.

Why does image persistence occur with my LCD monitor?

Image persistence (or image retention) is a result of a stationary image being displayed for a long period of time.    <Correction>   Turn off the screen for hours.   <Prevention>   1. Set the display to turn off after a few minutes of system idle under ”Power & Sleep “ (Win10) or “Battery” (Macbook).      2. Turn off the monitor when ...

How to do color calibration with my monitor?

Please refer to this FAQ, find "Calibrate your display" section and follow the instruction.

What to do when there is no display from my monitor?

Please make sure the monitor’s power cable is properly seated in the port and that the monitor is powered on. By default LED indicator will light up when the monitor is powered on. If no LED indicator lights up, please try another power outlet first.   If above doesn’t help, please contact ViewSonic service center.