Applied model: 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3. 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3. 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP. . Please refer either method below: You will need to set combination key to “ON” at Debug menuàOther Settingà Combination key. Then the font panel but...
Please check IFP/device/cable: 1.Check settings on IFP. a. Please check and make sure the correct input source is selected. b. Try different HDMI port on IFP. 2.Please check setting on laptop/PC. If a Windows-based notebook is connected, press "Windows Key + P" and make sure the Project settings is either on Duplicate or Ext...
Please download the touch driver for Mac in below link or visit the product page on our website. IFP 50-1/50 Gen 1: Download IFP 30: Download IFP 50-2/50-2 EP/50 Gen2/50-3/50-3A/50-3B/50-3 Gen 3/70: Download
Please visit product page of IFP7550 in our website and check the section of "RELATED ACCESSORIES" list for details.
Applied model 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3, IFP**70 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3, IFP**70 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP, IFP**70 Please use remote control to enter debug menu via pressing INPUT 9 9 1 in sequence, then go to Other Setting--àUSB Disk Enable a...
Applied model 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3, IFP70 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3, IFP70 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP, IFP70 Please press the following front panel button combination in sequence to unlock the touch function. “VOL+”, “VOL+”, “VOL+”, “SETT...
According to USB 2.0 SPEC, the maximum USB cable length is 5 meters and that’s why we provide one 5 meters USB cable along with IFP display. If you need a USB cable longer than 5 meters, please use self-powered USB hubs or active (repeater) cables.
Please connect an audio cable from the AUDIO OUT connector on the IFP30/50 to an external amplifier or active speaker with a power adapter.
It's a software limitation from MacOS. Please upgrade MacOS to v10.13 or later to solve the issue.
Please refer to attached file to create a power on/off run script to remote control IFP 50-1(Gen. 1) ,power on/off. File URL:https://support.viewsonic.com/helpdesk/attachments/33012153643